Our heater is cast by imported aluminum alloy which is power-saving and temperature-uniformity. And only have little temperature difference. We use digital timer which provides high accuracy and fine look. Our pressure adjuster enables you to adjust pressure at will. You need to prepare one air compressor.And the suggested specification is that power greater than 1.5 KW, capacity about 50 L, pressure more than 1 MPa. This machine doesn't have any plug. You need to wire with yourself. This machine must connect to reliable ground wire, then come into use, to ensure safety operation and production. The pressure should be chosen appropriately , do not adjust the pressure arbitrary, so as not to damage the machine due to over pressure. Do not put your hands under the heating plate during the pressing process, so as to avoid scald. During the pressing process, in the case of special circumstances, press the emergency stop button , then the heating plate will automatically rise, so accident can be avoid. At the end of the work, the staff must cut off the main electricity supply and turn off the gas source before leave.
Size: 31in x 39in (800mm x 1000mm). Voltage: 220V, 50hz / 60hz, 1P, 32A. Temperature range: 32-750.2 (0-399).Package Size: 60.2 in x 42.5 in x 37 in/1530 mm x 1080 mm x 940 mm. Gross Weight: 649 lbs /295kg. This machine can transfer patterns and texts which are printed by sublimating ink or solvent ink onto fabrics like cotton, linen, chemical fabric and nylon and ceramics through heat transfer technology. Flock printing and puff printing can also be achieved by this machine. It can be used to fuse cloth too, for example, clothes, caps and shoes etc.
It is also suitable for small scale of handkerchief production. Temperature and time requirements of different materials. Pure cotton: 180-220 (356-428), 25sec.Pearl board: 180 (356), 120-180sec. Metal pendant: 180 (356), 60sec. Mouse pad: 180 (356), 15sec. Key ring pendant: 180 (356), 100sec. Temperature setting: press the "SET" button, then the numbers on the lower line blink, temperature-setting mode starts. You can press and to adjust the temperature, press and hold the "SET" button for 2 seconds to confirm the setting. Time setting: press the increase and decrease button to set time. The letter "H" stands for "hour", "M" for "minute", and "S" for "second".
The item "31x39 Pneumatic Drawer-Type Large Format tshirt Sublimation Heat Press Machine" is in sale since Tuesday, September 11, 2018. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses". The seller is "signagewholesale" and is located in Jamaica, New York. This item can be shipped worldwide.